Artesyn Embedded Technology MVME8100, Installation And Use Manual

Page: 30 / 124

Introduction
MVME8100 / MVME8110 Installation and Use (6806800P25J )
30

Software Support
– VxWorks OS support
– Linux OS supports 32 bit

RTM: Compatible with RTM (assembly # 0106852****)

I/O
– One micro DB9 connector for console port on front panel
– One USB2.0 type A connector on front panel
– One front panel RJ45 connector with integrated LEDs for 10/100/1000 Ethernet
channel
– PMC/XMC site 1 front I/O and rear PMC I/O
– PMC/XMC site two front I/O
– Four Serial ports to P2/RTM, two with micro DB9 connectors on RTM panel and two on
planar headers
– Two 10/100/1000BASE-T Ethernet channels to RJ45 connectors on RTM panel
– Two 1000 BASE-BX Ethernet SERDES channels to backplane
– Two USB2.0 ports to RTM with USB type A connectors on RTM panel
– One SATA port to RTM with eSATA connector on RTM
– Two GPIOs to planar headers on RTM
Note: The front panel I/O connectors are available only in ENP1 (air cooled
variants). I/O signals in ENP4 (conduction cooled) variant are
accessed through P2 only.
The main features of the MVME8110 board are as follows:

Processor
(Subset of P5010 features used on MVME8110)
– Freescale QorIQ P5010,1.2Ghz, 15W TDP
– One e500mc-64 core, 512kB L2 cache
– 1-Mbyte CoreNet platform cache with ECC
– DDR3 memory controller (max 1333MT/s data rate [1200MT/s for 1.2GHz SKU])