Artesyn Embedded Technology MVME8100, Installation And Use Manual

Page: 29 / 124

Introduction
MVME8100 / MVME8110 Installation and Use (6806800P25J)
29

Ethernet
– One 10/100/1000BASE-T Ethernet port to front panel (only in air cooled variant)
– Two 10/100/1000BASE-T Ethernet channels to P2 / RTM
– Two 1000BASE-BX Ethernet SERDES channels to P0 backplane / RTM

Serial Ports
– One RS232/422/485 console port to front panel or P2 / RTM
– Up to 4 RS232/422/485 COM ports to P2/ RTM

VME Bus: VME64x and 2eSST

Timers
– Eight 32-bit timers in CPU
– Watchdog timer in CPU

PMC/XMC: Two PMC/XMC sites with 64-bit PMCIO on Site 1

Serial AT Attachment (SATA) SSD: Option for one 2.5 inch SATA drive (PMC/XMC Site 2)

GPIO Interface: Two GPIOs to RTM

VXS Interface
– VXS (VITA 41) Specification compliant
– Support backplane P0 connector

Form Factor
– Standard 6U, one slot
– Support 0.8, and 0.85 inch slot chassis
– Support heat frame on both sides for Conduction cooled board

Miscellaneous
– One front panel RESET Switch
– LED front panel status indicators: four user/fail/ready LEDs
– Planar status indicators
– Boundary scan support