Artesyn Embedded Technology 6806800R89E, Assembly, Installation And Use

Page: 93 / 118

Appendix C
SharpMedia™ PCIE-8120 Installation and Use (6806800R89F)
93
Known Issues
C.1 OctSetup Known Issues
1. When starting
octSetup
for the first time you might observe the following message:
SELINUX: labeling directory /var/lib/tftpboot with tftpdir _rw_t
…libsemanage.dbase_llist_query: could not query record value (No
such file or directory)
This message can be ignored. It has no impact on the correct functionality of octSetup.
This is a known issue of the tool semanage, which is called by
octSetup
.
2. When executing
octSetup
the following messages are displayed:

Note: optional package xxx not installed
This message is a hint and can be ignored as long as you plan only to start the demo. If
you plan to do some development for the DSPs, you should consider installing the
optional package indicated by the message.

Error: mandatory package xxx not installed
If you get this message, then you should install the missing package and execute
octSetup
again. Install a missing package with:
# yum install xxx
C.2 DSP Known Issues
1. When there is no connection between host and DSP, the following error is displayed
instead of the error statistics.
Error:
cOCTVC1_VSPMP_VOC_MSG_MODULE_GET_CONFIG failed, rc = 0x0a0a0003
(cOCTVC1_PKT_API_RC_TIMEOUT)
ulNumConnections out of range : 0
2. If every DSP displays
ulNumConnections out of range : 0
Check that the Artesyn License file is included.