Artesyn Embedded Technology 6806800R89E, Assembly, Installation And Use

Page: 49 / 118

Software Installation
SharpMedia™ PCIE-8120 Installation and Use (6806800R89F)
49
4.4.5 PERL Utilities
The PCIE-8120 software provides following PERL utilities:

pcie8120-boot-status : Provides users with the information about the boot status of DSPs
on PCIE8120.

pcie8120-dsp-boot-setup : This utility is internally used by octSetup utility for configuring
and creating the boot environment for DSPs to boot from host system.

pcie8120-listdev : Lists all the available PCIE8120 cards on the host system along with the
PCIe bus details.

pcie8120-serialno : Provides the serial numbers of all the available PCIE8120 cards on the
host system.

octService : Utility used for starting or stopping the DSPs available on PCIE8120 cards.

pcie8120-init : Initializes and configures all the available PCIE8120 cards on the host
system.

pcie8120-read-sensor : Provides data of all the sensors available on all the PCIE8120 cards
existing on host system.

pcie8120-tool : This utility script is used to upgrade the CPLD firmware.
4.5 Demo Application
Artesyn Embedded Technologies provides a demo application for PCIE-8120, setting up 400 IP
to IP channels (800 IP end points) per DSP, to transfer voice data from one DSP to another. The
demo application monitors all DSPs (one after the other) and evaluates its status by providing
statistical data.
For more information with basic examples on configuring the DSPs with various codecs, refer
to
Octasic SDK folder /opt/octasic/application/sample/octvoc .
Note : The demo is used to configure 12DSPs.