Artesyn Embedded Technology 6806800R89E, Assembly, Installation And Use

Page: 59 / 118

Application Development
SharpMedia™ PCIE-8120 Installation and Use (6806800R89F)
59
<MaxNumVideoRxSd Value="1"/>
<MaxNumVideoRx720p Value="0"/>
<MaxNumVideoRx1080p Value="0"/>
<MaxNumVideoBufferQcif Value="224"/>
For details about how to set the configuration parameters, see Octasic documentation Vocallo
Media Gateway API Configuration Guide , and the
octvoctn5009-sys_config.pdf
file at
/opt/octasic/software/octvoc
location.
For details about how to use the firmware image generator, see Octasic documentation and
the
oct2200m_boot_image_gen.html
file at
/opt/octasic/application/oct2200/oct2200_boot_img_gen
location.
Once you have created a new firmware image you should copy it to the
tftpboot
folder. For
details about how to copy firmware image to the
tftpboot
folder, see Executing Demo on
page 50 .
To load the new firmware image into the DSPs, you should execute:
# octservice stop all
# octservice start all
5.2.2 12xDSP Audio Transcode Demo
An example application in source code and as an executable for the reference platform is
provided in
12dsp_audio_transcode_net_api
at the
/opt/octasic/application/sample/octvoc/12dsp_audio_transcode_net_a
pi
location.

octvc1._config.arg
file is provided as an example for 12dsp audio application.
Align the resources of the DSP based on your application.

Also, keep the hardware-specific configuration parameters (port interface,
TdmModule) as specified in the RPM (see the first set of configuration parameters
above).