Artesyn Embedded Technology 6806800R89E, Assembly, Installation And Use

Page: 35 / 118

Hardware Preparation and Installation
SharpMedia™ PCIE-8120 Installation and Use (6806800R89F)
35
The PCIE-8120 temperature sensors provide alerts about absolute and delta temperature level
on the card. For more information on the default values to set up sensor alarms, see
Sensor Alert
Default Values , Table B-2 on page 85 .
3.2.2 Power Requirements
Before installing the card, make sure that the system is capable of safely delivering the required
power. Typical wattage status is given for the following operating conditions.
Table 3-1 Environmental and Thermal Requirements
Requirement Operating Non-Operating
Temperature 0°C to 40°C system ambient,
exceptional max. 55°C for max. 96
hours -40°C to +70°C
Forced Air Flow Recommended >0.5m/s -
Temp. Change +/-0.25°C/min +/-0.25°C/min
Rel. Humidity 5% to 90% non-condensing 5% to 95% non-condensing
Vibration
5 to 200Hz 1g Sinusoidal 1g Sinusoidal
Table 3-2 Wattage Status
Wattage Status Description
Idle Card powered and is in the default reset state.
Active Power good status on all DSP operations.
Maxload Maximum load test condition (Not achieved during normal operation).
Table 3-3 Power Requirements
PCIE-8120-A12/V12 PCIE-8120-A04/V04 PCIE-8120-A12/V12-N
3.3V current <100mA <100mA <100mA
Typ.Wattage
Idle 20W 12W 20W