Artesyn Embedded Technology 6806800R89E, Assembly, Installation And Use

Page: 46 / 118

Software Installation
SharpMedia™ PCIE-8120 Installation and Use (6806800R89F )
46
--dspctrl=<cmd> <all|<dsps...>>
[<key>]
cmd:
up
down
mac
status
addboot
rmboot
arl
param: <key>
vlan=<vid>
Controls the DSPs connected to switch.
Take DSPs out of reset.
Put DSPs into reset.
Retrieves MAC-addresses of the DSPs.
Shows whether the DSPs are in reset.
Adds DSPs to boot VLAN.
Removes DSPs from boot VLAN.
Writes MAC-addresses into ARL-tables.
Parameter key
Defines VLAN parameter.
--i2cctrl=<cmd> [<dev>] [<args..>]
cmd:
read
write
list
I2C-bus operation
Reads from device.
Writes to device.
Lists known devices.
--mfactrl=<cmd>
cmd:
up
down
status
Controls the MFA-FPGA.
Take MFA out of reset.
Put MFA into reset.
Shows status of MFA.
--bdinfo
print board information.
--extphyop=<cmd>
<FP_ETH1/FP_ETH2>
cmd:
up
down
status
Controls external PHY operation.
Enables external PHY.
Disables external PHY.
Shows status of ext PHY.
--cpld_version
Shows the CPLD version.
Table 4-1 Commands (continued)
Command Description