Artesyn Embedded Technology 6806800R89E, Assembly, Installation And Use

Page: 43 / 118

Software Installation
SharpMedia™ PCIE-8120 Installation and Use (6806800R89F)
43
The following message displays when executing octSetup for the first time and can be
ignored:
SELINUX: labeling directory /var/lib/tftpboot with tftpdir _rw_t
…libsemanage.dbase_llist_query: could not query record value (No
such file or directory)
.
2. Execute the below command (If you want to setup a different IP-address):
# octSetup --ipaddr=dd.dd.dd.dd
Configuring the IP-address:
The default format of <IP-address> is aa.bb.cc.dd. In that 'cc' denotes subnet value. Every
card in the system gets its own subnet. The subnet of each card differs with the other based
on their sequence of insertion.
The subnet changes based on the formula aa.bb.[cc+Card#).dd and
Card # denotes number of the card. By default, the first card takes the value as zero and it
increments by 1 for each card.
For example, assume that 192.168.100.1 is a sample IP-address. For the first card, the IP
address will be 192.168.[100+0].1 which is equal to 192.168.100. 1 and for the second
card it changes to 192.168.[100+1].1 that is equal to 192.168.101.1 and it increments
respectively based on the number of cards inserted.
The following message is displayed when executing
octSetup
for the first time and can
be ignored:
SELINUX: labeling directory /var/lib/tftpboot with tftpdir _rw_t
…libsemanage.dbase_llist_query: could not query record value (No
such file or directory).
Note : Execute the above step1 or step2 only once. The configuration is persistent and is
retained after system reboot.
4.4.3 Starting the DSPs
The Octasic firmware images are stored at
/var/lib/tftpboot/pcie8120
directory.