Arris NVG599 Administrator'S Handbook Download

Page: 40 / 228

Administrator’s Handbook

Home Network Status

Device IPv4 Address

The NVG599 device’s own IP address on the network.

DHCP Netmask

The device’s own netmask on the network.

DHCPv4 Start Address

The starting IP address of the DHCP range served by the device.

DHCPv4 End Address

The ending IP address of the DHCP range served by the device.

DHCP Leases Available

The number of IP addresses of the DHCP range available to be served by the device.

DHCP Leases Allocated

The number of IP addresses of the DHCP range currently being served by the device.

DHCP Primary Pool

Source pool of the IP addresses served by the NVG599 device, Public or Private.

IPv6

Status

May be

Enabled

Unavailable

Global IPv6 Address

The public IPv6 address of your device, whether dynamically or statically assigned.

Link-local IPv6 Address

The private IPv6 address of your device, whether dynamically or statically assigned.

Router Advertisement Prefix

The IPv6 prefix to include in router advertisements.

IPv6 Delegated LAN Prefix

The IPv6 network address prefix that identifies the NVG599 network.

IPv4 Statistics

Transmit Packets

IPv4 packets transmitted.

Transmit Errors

Errors on IPv4 packets transmitted.

Transmit Discards

IPv4 packets dropped.

IPv6 Statistics

Transmit Packets

IPv6 packets transmitted.

Transmit Errors

Errors on IPv6 packets transmitted.

Transmit Discards

IPv6 packets dropped.

WiFi Status

WiFi Radio Status

Status of the Wi-Fi radio:

Enabled

Disabled

Mode

May be 802.11

only, 802.11

B/G

or 802.11

B/G/N

. For

the 5.0 Ghz radio, may be 802.11

as well.

Bandwidth

The capacity of the wireless LAN to carry traffic in megahertz.

Current Radio Channel

The radio channel that your Wi-Fi network is broadcasting on.

Radio Channel Selection

May be set to

automatic

or manually selected.

MAC Address Filtering

May be either

Off

. If On, you can accept or block client devices from your WLAN

based on their MAC address.

Power Level

May be adjusted up to 100%, lower if multiple wireless access points are in use, and
might interfere with each other.

WiFi MAC Address

Shows the information of the MAC address of the wireless subsystem.

User SSID

May be either

Off

for either frequency.

Guest SSID

May be either

Off

for the 2.4 Ghz radio only.

Network Name (SSID)

The name or ID that is displayed to a client scan. The default SSID for the NVG599 is

att

xxx

where

xxx

is the last 3 digits of the serial number located on the side of the

NVG599 device.

Hide SSID

May be either

Off

. If

, your SSID will not appear in a client scan.

Wireless Security

The type of wireless encryption security in use. May be

Disabled, WPA, WEP,

Default Key,

Manual

Summary of Contents for NVG599





































































































































































































































Search results

Summary of Contents for NVG599

Reviews:

Related manuals for NVG599

Brands by name

Popular brands

Arris NVG599, Administrator'S Handbook

Search results

Summary of Contents for NVG599

Reviews:

Related manuals for NVG599

Brands by name

Popular brands