manualshive.com logo in svg

Arris NVG599, Administrator'S Handbook

Share
Download
Arris NVG599 Administrator'S Handbook Download Page 14

Administrator’s Handbook

14

Ethernet

Solid Green

 = Powered device connected to the associated port (includes devices with wake-on-LAN 

capability where a slight voltage is supplied to the Ethernet connection).

Flickering Green

 = Activity seen from devices associated with the port. The flickering of the light is 

synchronized to actual data traffic.
Off = The device is not powered, or no cable or no powered devices are connected to the associated 
ports.

WiFi

Solid Green

 = Wi-Fi is powered.

Flickering Green

 = Activity seen from devices connected via Wi-Fi. The flickering of the light is syn-

chronized to actual data traffic.
Off = The device is not powered, or no powered devices are connected to the associated ports.

HomePNA

Solid Green

 = Powered device connected to the associated port (includes devices with wake-on-LAN 

capability where a slight voltage is supplied to the Ethernet connection).

Flickering Green

 = Activity seen from devices associated with the port. The flickering of the light is 

synchronized to actual data traffic.
Off = The device is not powered, or no cable or no powered devices are connected to the associated 
ports.

Broadband 

1**, 2

Solid Green

 = Good broadband connection (good DSL sync or Gigabit Ethernet).

Flashing Green

 = Attempting broadband connection (DSL attempting sync).

Flashing Green

 and 

Red

 = If, after three consecutive minutes, the broadband connection fails to be 

established, the LED switches to 

Flashing Green

 alternating with a five second steady 

Red

 while 

attempting or waiting to establish a broadband connection. This pattern continues until the broad-
band connection is successfully established.

Flashing Red

 = No DSL signal on the line. This display is not used during times of temporary ‘no tone’ 

during the training sequence.
Off = The device is not powered.
** 

Broadband 1 LED

 is also the Gigabit Ethernet WAN LED when that is in play (and DSL is not).

Service

Solid Green

 = IP connected. The device has a WAN IP address from DHCP or 802.1x authentication 

and the broadband connection is up.

Flashing Green

 = Attempting connection, attempting IEEE 802.1X authentication, or attempting to 

obtain DHCP information.

Red

 = Device attempted to become IP connected and failed (no DHCP response, 802.1x authentica-

tion failed, no IP address from IPCP, etc.). The 

Red

 state times out after two minutes, and the Service 

indicator light returns to the Off state. 
Off = The device is not powered or the broadband connection is not present.

Phone 1, 2

Solid Green

 = The associated VoIP line has been registered with a SIP proxy server.

Flashing Green

 = Indicates a telephone is off-hook on the associated VoIP line.

Off = VoIP not in use, line not registered, or gateway power off.

USB

Solid Green

 = Powered device connected to the associated port (includes devices with wake-on-LAN 

capability where a slight voltage is supplied to the Ethernet connection).

Flickering Green

 = Activity seen from devices associated with the port. The flickering of the light is 

synchronized to actual data traffic.
Off = The device is not powered, no cable or no powered devices connected to the associated ports.

LED

Activity

Summary of Contents for NVG599





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands