manualshive.com logo in svg

Arris NVG599, Administrator'S Handbook, Page: 192 / 228

Share
Download
Arris NVG599 Administrator'S Handbook Download Page 192

Administrator’s Handbook

192

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation 
files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, 
modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the 
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the 
Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT 
LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN 
NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE 
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

GNU General Public License 2.0 (GPL)

This ARRIS product contains the following open source software packages licensed under the terms of the GPL 2.0 license:

•

Linux 2.6.30

•

Arptables 0.0.3-4 (also Copyright (c) Jay Fenlason)

•

bridge-utils 1.2 (also Copyright (c) Stephen Hemminger, Copyright (c) Lennery Buytenhek)

•

busybox 1.18.3 (also Copyright (C) 1999-2004 by Erik Andersen <[email protected]>)

•

conntrack 1.0.1

•

dnsmasq 2.45 (also Copyright (c) Simon Kelley)

•

ebtables 2.0.10-2 (also Copyright (c) Bart De Schuymer)

•

ez-ipupdate 3.0.11b7 (also Copyright (c) Angus Mackay)

•

haserl 0.9.26 (also Copyright (c) 2003-2007 Nathan Angelacos)

•

inetd (also Copyright (c) Kenneth Albanowski Copyright (c) D. Jeff Dionne Copyright (c) Lineo, Inc.)

•

iproute2 (also Copyright (c) Rusty Russell, Copyright (c) The Regents of the University of California, Copyright (c) USAGI 

WIDE Project, Copyright (c) Free Software Founcation, Copyright (c) Intel Corp. Copyright (c) Robert Olsson Uppsala Univer-
sity Sweden, Copyright (c) Harald Welte)

•

iptables 1.4.0 (also Copyright (c) Netfilter Core Team)

•

libnetfilter_conntrack (also (C) 2005-2011 Pablo Neira Ayuso)

•

libnfnetlink (also "(c) 2001-2005 Netfilter Core Team, (c) 2008 by Pablo Neira Ayuso <[email protected]>, (c) 2004 by 

Astaro AG, written by Harald Welte, (c) 2002-2006 by Harald Welte <[email protected]>")

•

mtd-utils 1.4.9 (also Copyright Texas Instruments)

•

ntpclient 2003_194 (also Copyright (c) Larry Doolittle)

•

pppd 2.4.4 (also Copyright Fred N. van Kempen, <[email protected]>, Copyright Donald Becker, 

<[email protected]>, Copyright Alan Cox, <[email protected]>, Copyright Steve Whitehouse, 
<[email protected]>)

•

rp-pppoe 3.10

•

samba 3.0.25a (also Copyright (c) Ricky Poulten 1995-1998, Copyright (c) Richard Sharpe 1998)

•

udev 136 (also Copyright (C) Kay Sievers)

•

vconfig 1.6 (also Copyright (c) Ben Greear)

•

wget 1.10.2 (also copyright (c) GNU Wget Authors)

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

 Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

 Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble
  The licenses for most software are designed to take away your freedom to share and change it.  By contrast, the GNU 
General Public License is intended to guarantee your freedom to share and change free software--to make sure the 
software is free for all its users.  This General Public License applies to most of the Free Software Foundation's software and 
to any other program whose authors commit to using it.  (Some other Free Software Foundation software is covered by the 
GNU Lesser General Public License instead.)  You can apply it to your programs, too.

Summary of Contents for NVG599





































































































































































































































Reviews:

No comments