manualshive.com logo in svg

Arris NVG599, Administrator'S Handbook

Share
Download
Arris NVG599 Administrator'S Handbook Download Page 80

Administrator’s Handbook

80

Each test generates one of the following result codes:

Below are some specific tests:

Result

Meaning

* PASS:

The test was successful.

* FAIL:

The test was unsuccessful.

* SKIPPED:

The test was skipped because a test on which it depended failed.

* PENDING:

The test timed out without producing a result. Try running the test again.

* WARNING:

The test was unsuccessful. The service provider equipment your modem connects to may not 
support this test.

Action

If Ping Fails, Possible Causes Are:

From the Check Connection Page:

Ping the Internet default gateway IP address

DSL is down, DSL settings are incorrect; gateway’s IP 
address or subnet mask are wrong; gateway router is 
down.

Ping an Internet site by IP address

Site is down.

Ping an Internet site by name

Servers are down; site is down.

From a LAN PC:

Ping the modem’s LAN IP address

IP address and subnet mask of PC are not on the same 
scheme as the modem; cabling or other connectivity 
issue.

Ping an Internet site by IP address

PC's subnet mask may be incorrect, site is down.

Ping an Internet site by name

DNS is not properly configured on the PC, site is down.

Summary of Contents for NVG599





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands