background image

Administrator’s Handbook

124

set conn name name dhcp-client discover-time seconds

The DHCP client parameters appear when the connection type has been set to 

dhcpc

. The 

discover-time

 value 

is in seconds; the default is 

30

.

set conn name name dhcp-client dns-enable [ on | off ]

Allows you to enable or disable the default behavior of acting as a DNS proxy. The default is 

on

.

set conn name name dhcp-client dns-override [ off | on ]

Allows you to enable or disable overriding default DNS behavior. The default is 

off

.

set conn name name dhcp-client vendor-class string

The 

vendor-class

 default information varies by model and components. This is information that identifies the 

unit.

set conn name name fs-egress filterset_name

Attaches a user filterset to a connection, which is applied to transmitted packets. See 

“Filter Set Commands” 

on page 124

.

set conn  name name fs-ingress filterset_name

Attaches a user filter set to a connection, which is applied to received packets. See 

“Filter Set Commands” on 

page 124.

Filter Set Commands

Filter sets provide packet filtering and QoS configuration. Packets are identified by characteristics that allow 
QoS and forwarding decisions to be made. These characteristics can be at the MAC layer, IP layer, TCP | UDP | 
ICMP layer(s), or (in applicable circumstances) 802.1q/p (VLAN-tagging) layer.

Your NVG599 device is capable of adding and stripping 802.1Q tags to and from  frames before transmission on 
its LAN interfaces. See also 

“Link Commands” on page 143

 for more information.

A maximum of 8 filter sets are supported. Each filter set can have up to 8 rules configured.  A maximum 8 
egress queues are supported. Each queue can have up to 8 entries.

A filter set rule identifies packet attributes to match with its 

match

 parameters. It acts on these packets using 

its 

default action

 parameters.

set filterset name filterset_name rule number order number

Determines order of execution of filter set rules (1 before 2, etc). If 

order

 is unspecified, the value of 

order

 is 

set to 1 more than the last order in the filter set. If 

order

 is set to an already existing order value, order values 

of other rules are incremented automatically.

set filterset name filterset_name rule number enable [ on | off ]

Dynamically enables or disables the specified filter set rule.

Summary of Contents for NVG599





































































































































































































































Reviews: