Arris NVG599, Administrator'S Handbook

Page: 138 / 228

Administrator’s Handbook
138
set ip6 dhcp-server T1 seconds
set ip6 dhcp-server T2 seconds
Sets global DHCPv6 T1, T2 values, per RFC 3315 for local NA addresses:
And also per global DHCPv6 T1, T2 values, per RFC 3633 for PD prefixes:
set ip6 dhcp-server info-refresh-time seconds
In seconds, per RFC 4242: The information refresh time option specifies an upper bound for how long a client
should wait before refreshing information retrieved from DHCPv6 in stateless mode. The default is
86400 (24
hours).
Static Routes
ip6 static-route
set ip6 static-route name conn-oid ipv6_conn_name
Route is directed to IPv6 connection named ipv6_conn_name .
set ip6 static-route name nexthop IPv6_address
Next-hop IPv6 address for forwarding. Can be a global or link-local address.
set ip6 static-route name prefix IPv6_prefix
IPv6 prefix.
set ip6 static-route name prefix-length value [ 1 - 64 ]
IPv6 prefix-length.
set ip6 static-route name metric value [ 0 - 255 ]
Metric assigned to route.
T1
The time at which the client contacts the server from which the addresses in the IA_NA were obtained to
extend the lifetimes of the addresses assigned to the IA_NA; T1 is a time duration relative to the current
time expressed in seconds. Defaults to
302400 (3.5 days).
T2
The time at which the client contacts any available server to extend the lifetimes of the addresses
assigned to the IA_NA; T2 is a time duration relative to the current time expressed in seconds. Defaults to
483840 (5.6 days).
T1
The time at which the requesting router should contact the delegating router from which the prefixes in
the IA_PD were obtained to extend the lifetimes of the prefixes delegated to the IA_PD; T1 is a time dura-
tion relative to the current time expressed in seconds.
T2
The time at which the requesting router should contact any available delegating router to extend the life-
times of the prefixes assigned to the IA_PD; T2 is a time duration relative to the current time expressed in
seconds.