ARRI ARRIFLEX 435 ES, Instruction Manual

Page: 18 / 143

Installation
18
fastening screw
handgrip
„RUN“-button
RS-socket
Shoulder Set S-4 without the Bridge Plate
• Remove the camera from the tripod.
• Detach the bridge plate.
• Position the shoulder set on the camera and fasten with
the two mounting screws.
• Plug the cable for starting and stopping the camera into
the RS-socket.
• Check that the shoulder set is firmly seated on the camera.
• Position the shoulder cushion on the camera with the
index pin and fasten it to the camera with the mounting
screw.
• Check that the shoulder cushion is firmly seated on the
camera.
Operation from the Shoulder
without the Shoulder Set
The shoulder cushion can be used with or without the
bridge plates BP-8 and BP-9.
• Position the shoulder cushion on the camera with the index
pin and fasten it to the camera with the mounting screw.
• Check that the shoulder cushion is firmly seated on the
camera.
• Position the handgrip on the rosette and fasten with the
fastening screw ➪ photo .
• Plug the cable for starting and stopping the camera into
the RS-socket.