ARRI ARRIFLEX 435 ES, Instruction Manual

Page: 83 / 143

83
Accessories
approx. 10 seconds after the last operation when it is being
run on batteries, and the camera control unit itself switches
off after approx. 5 minutes.
Replacing the Batteries
• Open the battery compartment
➪
photo with a coin.
• Pull out the battery pack.
Pay attention to the correct polarity
of the battery pack!
• Insert batteries as indicated on the battery pack.
• Insert the battery pack into the camera control unit and
close the battery compartment.
Connecting the Camera Control Unit
• Switch off the main camera switch (position “OFF”).
• Plug the cable KC 24S (2.4m) or KC 30S (20m) into the
socket on the side ➪ photo of the camera control unit,
pressing the slide on the plug in the direction of the plug.
• Plug the cable into the CCU-socket ➪ photo on the
camera.
• Switch on the camera.
• Switch on the camera control unit with the red button
➪ photo on the side.
CCU-socket
Key Function
RUN Starts and stops the camera.
SEND Sends the selected values to the camera.
HELP Shows the help text for the activated menu.
Cannot be used in the input mode.
The help text can be exited by depressing the ENTER-key.
EXIT Ends input mode
or exits the activated menu.
Switches display illumination on / off.
Key Functions in all Menus