ARRI ARRIFLEX 435 ES, Instruction Manual

Page: 79 / 143

79
Accessories
Heated Eyecup HE-3
The heated eyecup prevents the eyepiece
➪
photo from
fogging in low temperatures e.g. when filming outdoors
in winter.
• Pull the normal eyecup off the eyepiece, then place the
heated eyecup on the eyepiece.
• Plug the heated eyecup either
with cable KC-26S to the 11-pin accessory socket, or
with cable KC-42S to the RS-socket.
• Set the heating level with the toggle switch
➪
photo :
“LO”: low heat output
“HI”: higher heat output.
If the camera and accessories are powered by
battery, it is recommended to switch off the
eyecup-heating during extended breaks in filming.
Remote Run Switch RS-4
• Attach the remote run switch with the spring clamp
➪ photo
(e.g. to the pan handle).
• Plug the RS-4 plug into the “RS”-socket.