ARRI ARRIFLEX 435 ES, Instruction Manual

Page: 85 / 143

85
Accessories
sliding switch “NORM – PS/CCU”
• If digits after the decimal point are to have the value 0,
these need not be entered. Complete the input with the
“ENTER”-key. The selected frame rate is displayed in the
uppermost line on the CCU.
• Transfer the chosen value to the camera with the
“SEND”-key.
All selected frame rates within the acceptable range can be
fine-tuned, from 1 to 99.999 fps in increments of 0.001 fps,
above 100 fps in increments of 0.01 fps. This can be done
in standby or while the camera is running.
To carry out a fine-tuning of the frame rate:
• Switch the sliding switch on the camera to PS/CCU.
• Pre-select the frame rate.
• Depress key “9” in the SPEED menu.
• Switch the camera to Mode 2.
• Carry out fine-tuning:
Increase frame rate with key F1
Decrease frame rate with key F2
• Exit fine-tuning with the “EXIT”-key.