ARRI ARRIFLEX 435 ES, Instruction Manual

Page: 14 / 143

Installation
14
lens support ring clamp screw lens support
LS-8
lens support
LS-7
knurled
screw
clamping lever wedge plate
base
plate
Lens Support
The lens support consists of the lens support LS-7 (can be
snapped onto 19 mm support rods)
➪
photo or the lens
support LS-8 (can be pushed onto 15 mm support rods) and
the respective lens support ring
➪
photo for the lens in use.
• Mount the lens support onto the support rods from above
and let it click into place by applying slight pressure
(push the LS-8 onto the support rods from the front).
• Slide the relevant support ring
➪
photo onto the lens
but do not tighten.
• Then slide the lens into the lens mount receptacle and lock.
• Connect the support ring to the lens support and tighten
the knurled screw
➪
photo as well as the clamping
lever
➪
photo .
• Complete the process by tightening the clamp screw
➪
photo on the support ring.
Note: Mounting the support ring on the relevant lens is
usually carried out only once. The support ring
can then remain in position on the lens.