manualshive.com logo in svg

ARRI ARRIFLEX 435 ES, Instruction Manual

Share
Download
ARRI ARRIFLEX 435 ES Instruction Manual Download Page 76

Accessories

76

adjusting screw

Allen screws

clamping screw

brace

adjusting

screw

Adjusting the AVF-2

Unlike the standard viewfinder, the anamorphic viewfinder
will only provide an undistorted image in horizontal, locked
position. The locking stops of the AVF-2 can be adjusted
to an exactly horizontal position.

Using the AVF-2 on the Left Side of the Camera
• Loosen (do not remove) the two Allen screws 

➪ 

photo

in the locking stop.

• Turn the adjusting screw 

➪ 

photo

 with an Allen key until

the viewfinder image is free of distortion.

• Retighten the Allen screws.

Using the AVF-2 on the Right Side of the Camera
The AVF-2 can also be locked into horizontal position on
the right side of the camera. An adjustable brace 

➪ 

photo

can be fitted to the camera for this purpose.
The brace is attached to the accessory flange on the
camera body with a screw 

➪ 

photo

. The horizontal

position of the AVF-2 on the right side of the camera is
adjusted solely on the brace.
• Loosen the clamping screw 

➪ 

photo

.

• Using the adjusting screw 

➪ 

photo

, pivot the brace

until the viewfinder image is free of distortion.

• Retighten the clamping screw.

fastening screw

Summary of Contents for ARRIFLEX 435 ES
















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands