Cairns
English
30
05060153 00 24/10/2013
TEMPORARY DATA
z
Turn off the power supply
z
Completely remove all merchandise inside.
z
Remove all the removable parts, such as display dishes, grid trays, etc.
z
Wash with lukewarm water (max 30°C).
z
Disinfect using a detergent with an antibacterial component.
z
Carefully clean the bottom tank, the drip, and the grid that protects the water drain,
eliminating all foreign bodies that have fallen through the suction grid lifting, if
necessary, the sheet of the fans.
z
Carefully dry using a soft cloth.
20_4.Cleaning glass parts
20_5.Cleaning the parts in stainless steel
Certain situations can cause the formation of rust on the surfaces in steel:
z
iron remains left on damp surfaces, limestone, chlorine or ammonia based
detergents not rinsed properly, food incrustations or residues, salt-saline solutions,
dry residues of evaporated liquids.
Recent stains and rust:
z
clean with shampoo or neutral detergents, using a sponge or a rag. When finished,
eliminate any detergent residue, rinsing abundantly and thoroughly drying the
surfaces.
Old stains and rust:
z
use chemical substances on the stainless steel that contain 25% of nitric acid or
similar substances.
Die-hard stains and rust:
z
sandpaper or polish with a stainless steel brush. After this operation, wash with
detergents and carefully dry. This intervention may however cause scratches to the
surfaces due to the abrasive cleaning method.
20_6.Cleaning aluminium parts
z
DO NOT
use water on hot or cold glass surfaces; the glass could crack and
injure the operator(Rif. 18).
z
DO NOT
use rough or abrasive materials or metal scrapers that could scratch
the glass surfaces
z
DO NOT
use dirty cloths
z
Use a soft cloth with a neutral detergent or soap and lukewarm water (max
30°C).
z
Immediately remove all traces of water and detergent with a dry cloth in order
to prevent marks from forming and to prevent liquid from reaching the
gaskets, frame, or the glass door hinges.
z
DO NOT
use acid or alkaline detergents (e.g. bleach) which could corrode the
surfaces
z
DO NOT
use rough or abrasive materials or metal scrapers that could scratch
the aluminium surfaces
z
DO NOT
use steam cleaning equipment
z
DO NOT
use dirty cloths
z
Use a soft cloth with a neutral detergent or soap and lukewarm water (max
30°C).
z
Immediately remove all traces of water or detergent using a dry cloth in order
to prevent marks from forming.
