Arjo Enterprise E8000X, Service Manual

Page: 2 / 105

Page i
PREFACE
Read and understand this manual before attempting to service or repair the equipment.
This manual is intended for use by Arjo approved service technicians. The manual may be
provided to a customer in response to customer requirements, but in no event will Arjo be
responsible for any service or repair performed by customers.
Warnings, Cautions and Notes
WARNINGS
given in this manual identify possible hazards in procedures or conditions which,
if not correctly followed, could result in death, injury or other serious adverse reactions.
Cautions given in this manual identify procedures or conditions which, if not correctly
followed, could result in equipment failure or damage.
Notes given in this manual (indicated by ) are used to explain or amplify a procedure or
condition.
indicates optional features or functions not available on all beds.
General Warnings
Design Policy and Copyright ® and ™ are trademarks belonging to the Arjo group of
companies.
© Arjo 2019. As our policy is one of continuous improvement, we reserve the right to
modify designs without prior notice. The content of this publication may not be copied
either whole or in part without the consent of Arjo
WARNING
Before starting any service or maintenance procedures, ensure that the
equipment has been adequately decontaminated.
Electrical equipment can be hazardous if misused. Obey all safety
instructions.
Do not use electrically powered beds in the presence of flammable gases,
such as anaesthetic agents.
The bed and its sub-assemblies are very heavy and appropriate precautions
must be taken to avoid injury when moving or lifting them.
Disconnect the bed from the mains supply before starting any maintenance
activity. The bed will still operate on battery power unless the function is
locked on the Attendant Control panel (ACP).
Do not remove protective covers or open electrical enclosures while the bed
is connected to the mains supply.