Arjo Enterprise E8000X, Service Manual

Page: 46 / 105

Servicing Instructions Enterprise E8000X Service Manual
Page 42
10 Mains Lead - Replacement
This section describes how to replace mains lead. Reference is made throughout this section to
(“Electrical Assembly” on page 22).
Check the following characters on the product label (refer to Chapter 6, Subsection 1.1).
Depending on the letters listed at the highlighted positions, the following mains cable spares should be
used:
10.1 Removal
To remove the mains lead:
10.1.1 Remove the control box cover by prying from the left hand edge (refer to Subsection 9.1).
10.1.2 Insert a small flat bladed screwdriver into the slot (Fig 9, Item A) above the control box mains
inlet socket to release the retaining clip. Disconnect the mains lead (“Electrical Assembly” on
page 22, Item 9) from the control box (Fig 6, Item 5).
10.1.3 Remove the two panhead Pozidriv screws from the bracket assembly securing the mains lead
to the bed frame (Fig 9, Item B).
Figure 9: Mains lead retaining clip
8 X 1 G F 0 1 3 B A A A A
Country or Region
Table 5: Mains cable spares
Part No description Country Codes
818.320 Mains cable BS 1363 LB, OM, NG, MY, UK, IE, HK, SG, BH,
QA, U.A.E.,SA, EG, JO, KW, MT
818.321 Mains cable CEE 7/7 - PVC FR, DE, NL, ES, BE, CZ, IT, SE, MA, RO,
TH, EG, UYGR, BO, CL, NO, LT, HR, HU,
TR, KP, KR, RU.
826.047 Mains cable BS 546 ZA, IN, LY, PK
818.322 Mains cable AS/NZS 3112 AU, NZ
818.323 Mains cable NEMA / CSA Type 5-15 VE, TH, US, CA, EC, MX
826.046 Mains cable type CEI 23-16/V11 AZ, BB
823.305 Mains cable AFSNIT 107-2 D1 DK
826.103 Mains cable ABNT NBR 14136 BR
S9387 Mains cable GB 2099-1 CN
818.318 Mains cable CEE 7/7 - EPR DE
828.638 Mains cable SI32 IS
A
B