Arjo Enterprise E8000X, Service Manual

Page: 100 / 105

Technical Data Enterprise E8000X Service Manual
Page 96
ELECTROMAGNETIC COMPATIBILITY
Caution
The use of non-approved accessories may result in increased emissions or
reduced immunity of the equipment. A list of approved accessories is
included in the product instructions for use.
When this equipment is used adjacent to other electronic devices, the user
should observe the equipment to verify normal operation.
Guidance and manufacturer’s declaration – electromagnetic emissions
The bed is intended for use in the electromagnetic environment specified below. The customer or the
user of the bed should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The bed uses RF energy only for its internal function.
Therefore its RF emissions are very low and are not
likely to cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11
Class B
The bed is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies