182
14. Connect the gasline hose connectors to the fuel rails;
then install any nylon ties that were removed during
disassembly.
GZ124
15. Install the air filter housing and secure to the throttle
body with a hose clamp; then connect the IAT sensor
connector.
GZ013
16. Install the V-belt cooling duct and boots. Tighten
securely.
17. Install the front body panel, footrests, foot wells, and
front rack; then install the upper bumper sup-
port-to-frame cap screws (see Steering/Frame/Con-
trols).
18. Connect the negative battery cable; then secure the
battery with the tool tray and install the seat.
19. Pour in the proper quantities of engine/transmission
oil and coolant; then start the engine and warm up to
operating temperature.
20. Check for fluid leaks; then shut off engine and check
fluid levels (see Periodic Maintenance).
