161
4. Remove the nut securing the fixed driven assembly;
then remove the assembly.
PR388
5. Remove the fixed drive face.
6. Remove the cap screws securing the V-belt housing
to the crankcase; then remove the V-belt housing.
Account for two alignment pins.
GZ246A
7. Remove the cap screws securing the clutch cover;
then using a rubber mallet, carefully remove the
cover. Account for two alignment pins.
GZ246B
8. Using a suitable press, remove the clutch housing
from clutch cover, account for fixed drive face
spacer and O-ring.
GZ511
CC596
9. Remove and retain the two machine cap screws, and
bearing retainers.
GZ500
10. Using a suitable press remove the bearing from the
clutch cover.
GZ507