165
GZ246B
10. Making sure the alignment pins are correctly
installed, place a bead of silicone sealant on the mat-
ing surfaces and install the V-belt cover. Secure with
new “patch-lock” cap screws tightened to 8 ft-lb.
GZ263B
GZ244A
11. Place the driven clutch assembly into position and
secure with the nut (coated with red Loctite #271).
Tighten to 165 ft-lb.
GZ066
12. Slide the fixed drive face onto the clutch shaft.
13. Spread the faces of the driven clutch by threading in
a cap screw; then when the faces are separated, insert
the belt and push down between the faces.
GZ065A
14. Place the V-belt into position on the driven clutch
and over the front shaft.
GZ085
NOTE: The arrows on the V-belt should point for-
ward.
15. Pinch the V-belt together near its center and slide the
spacer and movable drive face onto the shaft. Using
an appropriate spanner wrench, secure the drive face
with a flat washer and a nut (threads coated with red
Loctite #271). Tighten the nut to 165 ft-lb.
