Arbor Technology Rigid-772 User Manual Download Page 93

Page: 93 / 113

- 81 -

BIOS

5.2.4. SATA Configuration

SATA Configuration

manages the system’s SATA configuration and also

delivers its status.

The featured settings are:

Setting

Description

SATA Controller(s)

Enables/disables SATA device(s).

Enabled

is the default.

SATA Mode Selection

Configures how to operate the SATA controller(s).

Options available are

IDE

AHCI

(default) and

RAID

SATA Controller Speed

Defines the maximum speed the SATA controller can

support.

Options available are

Gen1

Gen2

and

Gen3

(default).

Alternate ID

Enables/disables the SATA controller reporting its alternate

device ID.

Disabled

is the default.

This setting is only available when

SATA Mode

Selection

is set to

RAID

Summary of Contents for Rigid-772


















































































































Search results

Summary of Contents for Rigid-772

Reviews:

Related manuals for Rigid-772

Brands by name

Popular brands

Arbor Technology Rigid-772, User Manual

Search results

Summary of Contents for Rigid-772

Reviews:

Related manuals for Rigid-772

Brands by name

Popular brands