Arbor Technology Rigid-772 User Manual Download Page 90

Page: 90 / 113

- 78 -

BIOS

5.2.1. ACPI Settings

The submenu

ACPI Settings

enable users to change the system’s ACPI

(Advanced Configuration and Power Interface) configuration by the following

settings:

Setting

Description

Enable Hibernation

Enables/disables the system to/from hibernation (OS/S4

Sleep State).

This option may not be effective with some OS.

Options available are

Enabled

(default) and

Disabled

ACPI Sleep State

Sets the ACPI sleep state for the system to enter when the

suspend button is hit.

Options available are

Suspend Disabled

S1 only (CPU

Stop Clock)

and

S3 only (Suspend to RAM)

S1 only (CPU Stop Clock)

is the default.

Power-Supply Type

Sets the power-supply type.

Options available are

and

ATX

(default).

Note this setting should be consistent with jumper J1 to

prevent possible conflict. See

3.2.1. Jumpers

on page

for J1 jumper setting.

Summary of Contents for Rigid-772


















































































































Search results

Summary of Contents for Rigid-772

Reviews:

Related manuals for Rigid-772

Brands by name

Popular brands

Arbor Technology Rigid-772, User Manual

Search results

Summary of Contents for Rigid-772

Reviews:

Related manuals for Rigid-772

Brands by name

Popular brands