Arbor Technology Rigid-772, User Manual, Page: 60 / 113

- 48 -
Installation & Maintenance
3. From the rear panel, loosen and remove the 2 screws as marked in the
illustrations below.
4. After the said screws are removed, proceed to dismount the bottom cover.
Carefully pry at the joint of the bottom cover and top cover, which locates at
about two third of the computer’s height. Then completely part the bottom
cover from the computer.
Carefully pry at the joint
of the top cover and
bottom cover.
The inside of the computer comes to view.
1x PCIex8
1x PCIex16
To install internal USB drives, see
4.1.5. Install Internal USB Drives
on page
60 .
To install SATA storage devices, see
4.1.6. Install SATA Storage Devices
on
page 61 .
To install PCI/PCIe cards, see
4.1.7. Install PCI Express Cards
on page 64 .