Arbor Technology Rigid-772 User Manual Download Page 105

Page: 105 / 113

- 93 -

BIOS

Fast Boot

Enables/disables initializing only a minimal set of devices

required to launch the active boot options when booting

up the system.

Disabled

is the default.

This setting has no effect for BBS (BIOS Boot

Specification) options.

When enabled, the following settings become

available:

Setting

Description

Skip VGA

Enables/disables skipping EFI VGA

driver when booting up the system.

Disabled

is the default.

Skip USB

Enables/disables skipping USB

devices when booting up the system.

When enabled, the USB

devices won’t be available until

OS startup.

When disabled, the USB

devices are available before

OS startup. This is the default.

Skip PS2

Enables/disables skipping PS2

(keyboard and mouse) devices when

booting up the system.

Disabled

is the default.

Boot

Option

Priority

CSM

parameters

Configures whether to launch the UEFI/legacy OpROM,

boot options, filters, etc. See the full settings at

5.4.1.

CSM Paramenters

on page

Summary of Contents for Rigid-772


















































































































Search results

Summary of Contents for Rigid-772

Reviews:

Related manuals for Rigid-772

Brands by name

Popular brands

Arbor Technology Rigid-772, User Manual

Search results

Summary of Contents for Rigid-772

Reviews:

Related manuals for Rigid-772

Brands by name

Popular brands