Arbor Technology Rigid-772, User Manual

Page: 98 / 113

- 86 -
BIOS
Parallel Port
Configuration
Configures the computer’s parallel port (printer port). The featured
settings are:
Setting Description
Parallel Port
Enables/disables the parallel port.
Enabled is the default.
Change
Settings
Sets the optimal IO address and IRQ info for the
parallel port
Options available are:
IO=378h; IRQ=7; (default)
IO=378h; IRQ=5,7;
IO=278h; IRQ=5,7;
OR
When the Device Mode (see the next
setting) is set to ECP Mode , ECP & EPP
1.9 Mode or ECP and EPP 1.7 Mode , the
options available become the following:
IO=378h; IRQ=7; DMA=3; (default)
IO=378h; IRQ=5,6,7,10,11,12; DMA=1,3;
IO=278h; IRQ=5,6,7,10,11,12; DMA=1,3;
This setting is only available when the
parallel port is enabled.
Device Mode
Sets the parallel port mode.
Options available are:
STD Printer Mode
(default)
SPP Mode
EPP-1.9 and SPP Mode
EPP-1.7 and SPP Mode
ECP Mode
ECP and EPP 1.9 Mode
ECP and EPP 1.7 Mode
This setting is only available when the
parallel port is enabled.
Power On After
Power Fail
Sets whether the system should power on or power off when the
power supply resumes after an power failure.
Options are Power off (default) and Power on .