manualshive.com logo in svg

Arbor Technology Rigid-772, User Manual, Page: 79 / 113

Share
Download
Arbor Technology Rigid-772 User Manual Download Page 79

- 67 -

Installation & Maintenance

4.1.9. Install/uninstall SIM Card

The computer supports a SIM card for mobile networking and comes with an 

outside-accessible SIM card slot. Follow through the guide below to install a 

SIM card to the computer.

To install the SIM card:

1. 

From the front panel of the computer, find the door to the SIM card slot. 

Loosen and remove the screw that locks the door.

2.  Once the screw is removed, open the door. The SIM card slot then comes 

to view.

  

  

Follow the printed graphic to 

install the SIM card

SIM card slot

The door is a hinged door. On the inner side of the door, there is a printed 

graphic to guide users of the direction to insert the card.

3.  Position the SIM card at the slot as directed by the graphic printed on the 

inner side of the door. Push-insert the SIM card.

 

Push-insert the 

SIM card.

Summary of Contents for Rigid-772


















































































































Reviews:

No comments