Arbor Technology Rigid-772, User Manual

Page: 103 / 113

- 91 -
BIOS
NB PCIe
Configuration
Delivers the status and configures the north bridge PEG (PCI
Express Graphics) by the following settings:
Setting Description
PEG - Gen X
Configures PEG0 B0:D1:F0 Gen1-Gen3, or
leaves it on BIOS auto-configuration.
Options available are Auto , Gen1 , Gen2
and
Gen3
(default).
PEG0 ASPM
Configures the ASPM (Active State Power
Management) support for the PEG device, or
leaves it on BIOS auto-configuration.
This setting has no effect if the PEG isn’t
the active device at the moment.
Options available are: Disabled , Auto
(default), ASPM L0s , ASPM L1 and
ASPM L0sL1 .
When set to ASPM L0s or ASPM L0sL1 ,
the setting ASPM L0s becomes available.
ASPM L0s
Enables/disables PCI Express ASPM L0s.
Options available are Disabled , Root Port
Only , Endpoint Port Only and Both Root
and Endpoint Ports (default).
This setting is only available when PEG0
ASPM is set to ASPM L0s or ASPM
L0sL1
.
Memory
Configuration
Delivers the information/configuration of the computer’s system
memory such as RC version, frequency, total memory, the
presence/absence of memory module(s) at SO-DIMM sockets and
so on.