Arbor Technology Rigid-772 User Manual Download Page 78

Page: 78 / 113

- 66 -

Installation & Maintenance

2. Once the screw is removed, open the door. The CFast slot then comes

to view.

Follow the printed graphic to

install the CFast card

CFast slot

The door is a hinged door. On the inner side of the door, there is a printed

graphic to guide users of the direction to insert the CFast card.

3. Position the CFast card at the slot as directed by the graphic printed on the

inner side of the door. Push-insert the CFast card.

Push-insert the

CFast card.

To uninstall the CFast card:

1. Loosen and remove the card door screw and open the card door.

2. Push-eject the CFast card.

3. Remove the CFast card.

4. Refasten the screw to close the card door.

Note to refasten the screw to close the card door each time the CFast card is

installed or uninstalled.

Summary of Contents for Rigid-772


















































































































Search results

Summary of Contents for Rigid-772

Reviews:

Related manuals for Rigid-772

Brands by name

Popular brands

Arbor Technology Rigid-772, User Manual

Search results

Summary of Contents for Rigid-772

Reviews:

Related manuals for Rigid-772

Brands by name

Popular brands