Arbor Technology Rigid-772, User Manual

Page: 67 / 113

- 55 -
Installation & Maintenance
Note: The above mentioned demonstrated one clip only. When you install
the memory module with heat spreaders, be sure to use both clips.
6. Remove the top cover from the computer as described in 4.1.1.1. Remove
Top Cover on page 44 .
7. Find the SO-DIMM sockets on the board as marked in the illustration
below.
The SO-DIMM sockets are vertical type, and each socket has two latches
to fix the memory modules. The memory module can only be installed by
one direction due to the key notch.
8. Pull back both latches from the socket.
the break
the SO-DIMM socket’s slot connector
latch
latch
vertical-type SO-DIMM socket (overview)
9. Confront the memory module’s edge connector side at the SO-DIMM
socket. Position the memory module at the SO-DIMM socket, with the
memory module’s key notch aligned at the break of the SO-DIMM’s slot
connector.