Arbor Technology Rigid-772 User Manual Download Page 72

Page: 72 / 113

- 60 -

Installation & Maintenance

4.1.5. Install Internal USB Drives

Since some critical application programs rely on a USB key to run, an USB

drive is necessary to store related encrypted keys and digital certificates. The

computer allows building two USB ports inside the chassis to support two

USB drives to work therein for reinforced protection against theft or tamper.

(Configure-to-Order only)

To install the internal USB drive(s):

1. Remove the bottom cover from the computer as described in

4.1.1.2.

Remove Bottom Cover

on page

2. Find the two USB ports inside the computer as marked in the picture below.

3. Install an USB drive to one of the internal USB ports.

Adjust this iron

to make space

for the USB

drive installed.

4. Restore the bottom cover to the computer.

Summary of Contents for Rigid-772


















































































































Search results

Summary of Contents for Rigid-772

Reviews:

Related manuals for Rigid-772

Brands by name

Popular brands

Arbor Technology Rigid-772, User Manual

Search results

Summary of Contents for Rigid-772

Reviews:

Related manuals for Rigid-772

Brands by name

Popular brands