ARAG IBX100 4679004, Installation - Use - Maintenance

Page: 40 / 60

40
DATA AND SETTINGS
Quits without confirming the
changes
Saves the changes
Delete
Quit
Confirm
Goes back to previous menu,
or scrolls the pages of a menu
(previous page)
Scrolls the pages of a menu
(next page)
Goes back to Main screen
Saves the changes to current
page
12.7.6 Seletron status
This menu has two main functions:
• INSTALLATION
Allows to display the progress during Seletron's pairing procedure ( chap .
13 Seletron connection
).
• DIAGNOSTICS
Allows to check the connection of each single Seletron.
CARRY OUT both procedures with RUNNING ENGINE.
SELETRON CONNECTION DIAGNOSTICS
Color legend:
Correct operation.
Seletron does not respond.
Power supply error on Seletron devices: power voltage lower than the allowed value.
The screen in
Fig. 83
shows the corresponding number.
Fig. 83
If necessary, you can repeat the pairing procedure for each Seletron
device: BEFORE STARTING A NEW PAIRING PROCEDURE, YOU MUST
RESET THE PREVIOUSLY ALLOCATED IDENTIFICATION NUMBERS.
Use the function
ID Reset
( par.
13.1
).