30
IMPLEMENT SETTINGS
11.11
System configurations
Set the device system options.
1
2
Fig. 61
SYSTEM STATUS
1
The setting of this item makes
visible / invisible
the
Application rate regulation
function of the menu
Automatic functions
(
par.
).
2
The setting of this item enables nozzle manual selection.
Manual nozzle selection
Automatic nozzle selection
Nozzle selection modes are described in
par.
3
5
4
Fig. 62
AUXILIARY INPUT
3
Select the type of auxiliary control (Auxiliary Input) connected to the VT.
4
Enable/ disable
the auxiliary control selected in point
2
.
5
Enable / disable
the displayed controls, linked to the selected Auxiliary Input type.
6
7
8
9
10
11
Fig. 63
TASK CONTROLLER
The VT can make some functions through the TC, ONLY IF THEY ARE enabled in this
screen:
6
Enable / disable
the job total counter control.
7
AEnable / disable
(section and main) valve automatic closing.
8
Enable / disable
the use of prescription maps for treatments with variable
application.
TIMING
The correct management of valve timing, set on tool OP (IBX100), may vary
based on the connected VT.
9
Indicate the time between the moment when the command is sent to the valves and
the actual moment in which product output starts.
10
Indicate the time between the moment when the command is sent to the valves
and the actual moment in which product output stops.
11
Adjustment parameter for variable applications (with the use of prescription maps):
this datum is used to indicate the advance time of application rate adjustment when
the machine approaches the area changeover of the prescription map.
Quits without confirming the
changes
Saves the changes
Delete
Quit
Confirm
Goes back to previous menu,
or scrolls the pages of a menu
(previous page)
Scrolls the pages of a menu
(next page)
Goes back to Main screen
Saves the changes to current
page
