18
BASIC SETTINGS
10
IMPLEMENT SETTINGS > BASIC SETTINGS
1
Fig. 29
Upon first switching on, run the device basic settings.
For correct use of keys while programming refer to
par.
2
Fig. 30
3
Fig. 31
4
Fig. 32
BASIC SETTING PROCEDURE START
- The VT starts the guided setup procedure: go through each step selecting the desired
options.
next step;
previous step
- As soon as the message
Confirm change to settings
appears,
configuration is complete.
Press
.
BASIC SETTINGS MENU
•
Sprayer technology
Valves
: system with electric-activated valves - with gearmotor /
Seletron
: system with Seletron valves.
•
Main valve type
: main control valve installed on the control unit.
None
/
2 ways
(drain valve) /
3 ways
(main valve).
•
Spraying spot type
: Seletron type.
1
single /
2
twin /
4
fourfold.
•
Flowrate reference sensor
: device used to calculate flowrate.
Flowmeter
Pressure sensor
: measured pressure is used to calculate application rate.
Both
: within the working limits the VT uses the flowmeter, otherwise it uses the pressure sensor, ONLY if properly configured.
•
Terminal nozzle type
None
Buffer zone
: allows enabling the use of nozzles in the "Buffer zone" see
par.
"BUFFER ZONE" FUNCTION ENABLED
“Fence”
: allows enabling the use of "Fence" nozzles see
par.
"FENCE NOZZLE" FUNCTION ENABLED
.
•
Tank level source
: Device used to read tank level.
Manual
: no device connected;
Filling flowmeter
;
Level sensor
.
YOU COMPLETED BASIC SETUP. WAIT FOR THE SYSTEM RESTART.
NOW PROCEED TO ADVANCED SETUP DESCRIBED IN
CHAP
.
