ARAG IBX100 4679004, Installation - Use - Maintenance

Page: 25 / 60

25
IMPLEMENT SETTINGS
11.7 Rev counter
1
Allows enabling/disabling rev counter status ( rev counter enabled / rev counter disabled).
2 Enter the values for the rev counter installed on the system.
3 - 4 Enable the relevant function on the
Info and alarms
menu ( par.
12.3
) if you want the VT to trigger an alarm when, during spraying, the measured
RPM is outside the set range. For minimum speed, the control is active only when the spraying is active ( main switch ON ).
For the procedure to be followed when an alarm occurs, please refer to par. 16.3 .
5
Real-time displaying of the actual datum
1
4
2
5
3
Fig. 48
11.8 Tank
Allows setting the tank values.
1 Indicate range value. The tank alarm is triggered when, during spraying, the tank level falls below the set value (enable the special function inside
menu
Info and alarms
, par.
12.3
)
For the procedure to be followed when an alarm occurs, please refer to par. 16.3 .
2 Indicate tank capacity.
1
2
Fig. 49
Quits without confirming the
changes
Saves the changes
Delete
Quit
Confirm
Goes back to previous menu,
or scrolls the pages of a menu
(previous page)
Scrolls the pages of a menu
(next page)
Goes back to Main screen
Saves the changes to current
page