52
JOB FUNCTIONS
15.5
Main control and section management
15.5.1 Controls WITH Auxiliary Input
Refer to the user's manual supplied with the device.
Auxiliary Input ON
The ARAG Auxiliary Input command system is not compulsory on all systems, therefore it must be ordered
separately. Some VT allow commanding the section valves directly from the touch screen.
15.5.2 Controls WITHOUT Auxiliary Input
Auxiliary Input OFF
A
B
B
If no Auxiliary Input is present (indication
A
), the valves are controlled (control unit
and/or hydraulic valves) directly through the monitor touch-screen panel (keys
B
).
To display the necessary controls on the touch-screen panel, the desired auxiliary
control must nevertheless be set (
par.
MAIN CONTROL FROM TOUCH-SCREEN PANEL
Press to enable or disable the main command.
Master ON
Master OFF
COMMANDS TO SECTION VALVES FROM TOUCH-SCREEN PANEL
Press button to display the
Section switches
page
- Press to open/close the relevant section
Section ON
Main control ON
Section ON
Main control OFF
Section OFF
- Press to open/close the relevant end nozzle
End nozzle ON
Main control ON
End nozzle ON
Main control OFF
End nozzle OFF
- Press to close all boom sections
- Press to open all boom sections
Sections ON - Main control ON
Sections ON - Main control OFF
CONTINUES
