30
English
9.13 Nozzle
spacing
(Menu
46.0)
This parameter sets the nozzle spacing.
This parameter is needed for:
- calculating the nominal pressure, if the pressure transducer is not installed;
- calculating the fl ow rate, if the fl ow meter is not installed.
• Access programming as described in par.
9.9 - Access to advanced programming
1) Press in sequence to scroll through the
parameters in the Advanced Menu, and
select Menu 46.0
2) Press to set the nozzle spacing
Control unit valve switches:
A) Press to modify the value of the num-
ber being set
B) Press to select the next number (the
selected number will flash on the display)
C) Press to confirm the new value
D) Press to exit without modifying the
value
9.14
Type of section valve (Menu 50.0)
This parameter sets the type of section valves present on the control unit.
• 2 way (valves without calibrated return): corresponds to programming option "
"
• 3 way (valves with calibrated return): corresponds to programming option "
"
• Access programming as described in
par. 9.9 - Access to advanced program-
ming
1) Press in sequence to scroll through the
parameters in the Advanced Menu, and
select Menu 46.0
2) Press to set the type of section valves
present on the control unit
During data modification:
A) Press to confirm the new value
B) Press to exit without modifying the
value
