10
English
Continues par. 5.1 - System configuration
Assembly diagram for crop sprayers with centrifugal pump - BRAVO 32X
Legend:
A
Control
panel
B
Starter
key
S
Speed
sensor
D
Filler
pump
M
Pressure
transducer
F
Flow
meter
T
Filler fl ow meter or
Pump
Protector
R
Foam
marker
X
Rpm
sensor
or Pump Protector
P
Control
valve
1-5
Section valves
E
Hydraulic
unit
U
Remote
unit
Tab. 6
5.2
Locating the computer
• BRAVO series computers must be installed in the cab of the tractor, in observance of the following
precautions:
- DO NOT install the computer in an area subject to excessive vibration or collisions
as this may damage it or lead to its controls being accidentally actuated;
- install the unit is a visible position within easy reach by hand: bear in mind that
the computer should not obstruct the operator’s freedom of movement or block his
view.
• Bravo series 32X:
mount the control unit at the rear of the tractor, near to the control and hydraulic units.
Install the four-pole connector running from the control unit to the control panel.
Note the connections required for the computer to operate (table 8 and 10), the
required length of the cables, and provide adequate space for the connectors and
cable runs.
An identifi cation symbol is located next to each connector to indicate its function;
for the confi guration of the systems, refer to par. 5.1 - System confi guration.
CONTINUES
