19
English
9 PROGRAMMING
The computer can be programmed to ensure correct distribution of the treatment products.
This must be done once only, when installing the computer: further modifi cations will only be ne-
cessary if the equipment on the tractor is changed or modifi ed.
In the following paragraphs, the screen shots only show the key points of the pro-
gramming procedure: the display may change when the keys described in the text
are pressed.
When setting parameters, their values fl ash on the display.
9.1
Pre-programming tests and checks
Before programming the computer check that:
• all components are correctly installed (control unit and sensors)
• the equipment is connected to its power sources
• all components are correctly connected (control unit and sensors)
Incorrect connections of the components and the use of other components from
those specifi ed can damage the system or components themselves.
9.2 Advanced
menu
The advanced menu gives access to all BRAVO computer programming options.
The minimum and maximum settable values for the parameters are given in para-
graph 11.1 - Data and units.
The following table shows the structure of the advanced menu.
CONTINUES
