12
English
5.3
Mounting the bracket
The computer and control unit must be mounted on a bracket installed at the desired location (the
previous paragraph shows the bracket drilling template).
The bracket must be extracted from its seat on the computer (A, Fig. 1) and installed using the
provided bolts (B).
Make sure the bracket is securely mounted, fi t the computer or control unit to it, and push it in until
it locks in place (C).
Fig. 1
5.4
Installing the remote unit
Orient the remote unit as indicated in the table:
Tab. 11
5.5
Location of the control unit
The control unit must be installed with the special brackets supplied and mounted to the unit, po-
sitioning it as shown in the manual provided with it.
MAKE SURE TO FOLLOW ALL THE SAFETY INSTRUCTIONS GIVEN IN THE CON-
TROL UNIT’S MANUAL
