82
13.3.2
F2
Waypt
Save one "Waypoint"
onto display (Fig. 281 and 282).
Afterwards it is possible to activate the procedure to follow the saved points in sequence.
"Waypoints" can be saved with the procedure below:
field full Zoom
From this page, you can store a field point even if tractor is in another position.
1
Press keys
F3
,
F4
,
F5
,
F6
to shift position of cursor
a
(Fig. 282) on field.
2
Once you reach the desired position,
press F1
.
Fig. 282
Here you can also delete one point previously stored:
press keys
F3
,
F4
,
F5
,
F6
to shift the cursor position
a
near or above the
marked point, and press
F1
.
• Procedure of sequential return to the "
Waypoints
".
Lets suppose to mark "Waypoints"
B
,
c
,
d
(Fig. 283).
Press
F2
to receive driving information and return
to the first marked "
Waypoint
"
(
B
in Fig. 283):
- A light blue line connecting the middle position to the flag shows the trajectory to be followed to get closer to first marked point (
B
in Fig. 284).
- The display shows in light blue the number of tracks to be crossed before reaching point (
e
in Fig. 284):
in the example,
+
next to the number indicates you shall move to the right,
-
indicates you shall move to the left.
Carry on driving.
- When you reach the track with the "Waypoint", the display shows the distance between your position and the point (
f
Fig. 285).
- Move along the track and check that distance in metres decreases: you are getting closer to the point.
When you are nearby, you can see the flag displayed.
- When reaching the flag the distance value becomes "zero" (Fig. 286): press
OK
to receive information to reach the following point (
c
in Fig. 286),
or
ESC
to quit the procedure.
OK
pressed several times displays return information of each "Waypoint", following the point marking order.
Fig. 283
Fig. 284
Fig. 285
Fig. 286
WORK FUNCTIONS - PAGE 3
Summary of Contents for 46742DX1
Page 6: ...Notes 6...
Page 94: ...Notes 94...
