ARAG 46742DX1, Installation, Use And Maintenance Manual

Page: 24 / 96

24
10.2 - Valves
Fig. 44
In this menu set the type of valves installed on the system and the relevant data.
10.2.1 Boom sections
Fig. 45
Indicate the type of section valves installed.
•
2 Ways
= valves without calibrated backflows
•
3 Ways
= valves with calibrated backflows
10.2.2 Auto switch-off
Fig. 46
Indicate the section valve operation mode, especially if the section automatic closing is active when the main valve
is closed.
• "P" operation mode (option
No
):
section valves are operated independently.
Main switch control functions do not affect section valve opening or closing.
• "M" operation mode (option
Yes
):
section valves are closed or opened from the main switch provided that section valve switches are set in the
appropriate position; in other words, if section switches are set to OFF (lever down), operating the main switch
does not affect the sections. If one or more section valve switches are set to ON (lever up), opening or closing the
main switch opens or closes the section valves as well.
M operation (option
Yes
) must be activated when:
- System features no main valve (menu
Main valve > None
- par. 10.2.4)
- Bravo 400 is connected to a nozzle holder control (menu
Selejet
>
Enabled
, par. 10.2.5)
10.2.3 Pressure regulator
Fig. 47
Indicate the type of control valve installed.
•
2 Ways
=
•
3 Ways
=
ADVANCED PROGRAMMING - MACHINE SETTINGS
Par.
9.4
Exit
function or
datum
change
Increase /
decrease
data Scrolling
menu
pages Shift
the
cursor
Confirm
access or
datum
change
Reset /
disable
data Scrolling
menu
items