ARAG 46742DX1, Installation, Use And Maintenance Manual

Page: 73 / 96

73
13.1.9
F8 Tank
It controls the tank filling.
Fig. 248
Press
F8
to display the
Tank filling
.
Here many functions can be activated:
- Reset level (Fig. 249)
- Filling (Fig. 250)
- Manual setup of filled quantity (Fig. 251)
If the filling flowmeter is connected the display shows the filling data
in real time.
ReSet level tank filling
Fig. 249
Press
F2
to reset the tank level.
The icon on display indicates the empty tank.
Fig. 250
Press
F4
to bring the tank level to the maximum value.
The icon on display indicates the full tank.
The capacity was set with the advanced programming (par. 10.6.1)
manual Setup of filled quantity
Fig. 251 Fig. 252
1
Press
F6
to set the quantity of fluid poured into the tank.
2 Set the value.
3
Confirm datum.
The icon on display indicates the tank level reached.
It is not possible to set values exceeding the tank capacity (
a
in Fig. 251). In this case the screen in Fig. 252 shows the message
Value out of range!
WORK FUNCTIONS - PAGE 1
End oF PAR. 13.1 - FUncTIonS LIST - PAGE 1