ARAG 46742DX1, Installation, Use And Maintenance Manual

Page: 37 / 96

37
11.3 - Nozzles settings
Fig. 92 Fig. 93
In this menu it is possible to set 12 types of ISO nozzles and
6 "Users" (A, B, C, D, E, F).
Select the nozzle to be set (Fig. 92) and enter the features (Fig. 93).
Repeat the programming for each nozzle.
11.3.1 Flowrate - Pressure
Fig. 94 Fig. 95
Set the reference rate and pressure for the selected nozzle.
Bravo 400 can calculate the pressure without the pressure
sensor based on the rate of the used nozzle.
The
Flowrate
and
Pressure
data can be ONLY
modified for the "User" nozzles and not for the "ISO"
ones.
11.3.2 Minimum pressure - Maximum pressure
Fig. 96 Fig. 97
Set the pressure limits for the selected nozzle.
Enable the suitable function in the
Alarms
menu
(par. 11.5.4 -
Nozzle pressure alarm
) to allow
Bravo 400 triggering an alarm when the nozzle
is out of the set limits.
ONLY FOR
On the basis of the limits of the nozzle in use Bravo 400 select
the suitable nozzle during the treatment; for this reason it is
necessary to set them correctly.
USER MENU - NOZZLES SETTINGS
Legend:
a
nozzle
B
Reference rate
c
Reference pressure
Par.
9.4
Exit
function or
datum
change
Increase /
decrease
data Scrolling
menu
pages Shift
the
cursor
Confirm
access or
datum
change
Reset /
disable
data Scrolling
menu
items